HORIZON FORMWORK CO., LTD.
Professional manufacturer of formwork and scaffolding systems
Sales & Support:
|
Product Details:
Payment & Shipping Terms:
|
| Material: | Q235, Steel Pipe | OEM: | Available |
|---|---|---|---|
| Finishing: | Painting, Zinc-plate, Powder Coating | Standard: | EN1065 |
| Size: | 2.5m-4.0m | Application: | For Building Costruction |
| Highlight: | adjustable steel props,push pull props |
||
Adjustable Floor Shoring Props With Cup-type Nut For Building Construction
Adjustable props are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m.
Two end plates, upper and lower plates, serve to give stability to the steel prop.
The inner tube is Ø 48 mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the pin.
The outer tube is Ø56 mm (thickness from 1.6 mm to 2.5mm).
The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.
The thread is covered by a cup-type nut that has 2 side handles for easy handling.
A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.
|
Height Range |
Outer tube (mm) |
Inner tube (mm) |
Thickness (mm) |
Adjusting device |
| 1.7m-3.0m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 2.0m-3.6m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 2.2m-4.0m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 2.5m-4.5m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 3.0m-5.5m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
Contact Person: Mr. H. Chang
Tel: +86 319 3188757
Fax: 86-319-3156299
